MAC Audio MP 16.2 User Manual Page 67
- Page / 72
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
67
TroubleshootingTroubleshooting
Page(s)
Troubleshooting
If you think a problem has occurred, check the following items before asking for a repair.
Symptom
Power is not on. 20
64
The projection lamp does not light. 64
66
62
64
No image is displayed. 30
22, 29
44
25
25
The image is distorted. 20
21
The image is blurred. 31, 38
19
21
30
The image is flickering. 45
The image is out of alignment. 45
The color is out of alignment. 45
No sound. 40
The cabinet produces a cracking
-
sound.
The TEMP LED lights up or blinks. 62
The LAMP/COVER LED lights red.
66
64
64
The remote control does not 17
work. 9, 10
9, 10
17
To be Checked
•Verify that the power cord is connected.
•Verify that the lamp unit cover is installed.
•Verify that the lamp has not blown.
•Verify that the air filter is installed.
•Verify the internal temperature. The lamp does not light due to a
protection control if the temperature is too high.
•Verify that the lamp usage time is less than 1500 hours.
•Verify the selection of the connected input.
•Verify that the cable for the connected device is appropriately
connected.
•Verify sure that Brightness or Contrast in the Image Adjustment
menu is not set to minimum.
•Verify that the resolution on the PC is correctly set.
•Verify the functions of the PC.
•Verify that the projector is placed properly.
• Keystone compensation may be applied.
• Check the focus.
• Make sure that the projection distance is within the focusing
distance.
• Keystone compensation may be applied.
•Verify whether the lens cap is on.
• Adjust Phase in the Sync Adjustment menu.
• Check the setting of the Sync Adjustment menu.
• Adjust Phase in the Sync Adjustment menu.
• Make sure that the setting in the Volume menu is not set to
minimum.
•A sound is produced when the cabinet slightly expands or contracts
due to the changes in the room temperature. This will not affect
projector performance.
• Follow the procedures for protection against overheating.
• Make sure that the air filter is not disconnected.
• Make sure that the lamp unit cover is in place.
• Check whether the lamp usage has exceeded 1500 hours.
• Make sure that the battery is not blown or worn.
• Make sure that other light from lighting, for example, is not entering
the remote control sensor.
• Make sure that the remote control sensor of the main unit is not
obstructed.
• Make sure that the projector is not installed near inverter-driven
equipment.
Cha.07 04.7.29, 11:49 AM67
- MULTI PROJECTOR 1
- ● Features 2
- ● About Trademarks 2
- ● Warning Symbols 3
- ● Safety Precautions 3
- CAUTION 4
- Cha.01 04.7.29, 11:43 AM5 5
- Cha.01 04.7.29, 11:43 AM6 6
- Cha.01 04.7.29, 11:43 AM7 7
- Contents 8
- About the anti-theft lock 10
- ■ Terminal Panel 11
- Cha.02 04.7.29, 11:44 AM12 12
- Part Names and Functions 13
- Cha.02 04.7.29, 11:44 AM14 14
- Remote Control 15
- ROTAT IO N 16
- ■ Battery Replacement 17
- ■ Remote Control Operations 17
- How to Install the Projector 18
- Adjustable feet 20
- ■ Compensating Keystone 21
- ● List of cables and adapters 22
- About the PC Input and Output 23
- ■ About RGB Video Output 24
- Manufacturer Series 25
- Cha.04 04.7.29, 11:45 AM26 26
- Basic connections 27
- Cha.04 04.7.29, 11:45 AM28 28
- Cha.04 04.7.29, 11:45 AM29 29
- Basic Operation 30
- KEYSTONE 31
- 6 Adjust the brightness 32
- 8 Freeze the projected image 33
- 9 Close the window 33
- OHP SAVE 34
- Display the pointer 35
- Select the type of pointer 35
- Mute the image 35
- A4 horizontal orientation 36
- Displaying OHP stored image 37
- 5 Adjust the zoom ratio 39
- 6 Move the zooming position 39
- 7 Synchronized Adjustments 39
- 8 Display the pointer 39
- FREEZE button 40
- 1 Turn the lamp off 42
- 2 Disconnect the power cord 42
- Menu Structure 43
- Description of Menu Items 44
- <Image Adjustment Menu> 45
- <Sync Adjustment Menu> 45
- ◆ Setting 1 46
- ◆ Setting 2 46
- ◆ Language Selection 47
- ◆ Projection Mode 47
- 1 Press the 48
- When selecting “ON” or “OFF” 49
- OHP STORE 50
- MENU SET 50
- POINTER/ 51
- ◆ When OHP Is Selected 52
- ◆ When PC Input Is Selected 53
- ◆ CF Slide List 54
- ◆ Display CF Slides 54
- 3 Press the 55
- 2 Press the 56
- 5 Quit the slide display 57
- Maintenance 62
- 1 Remove the lamp unit cover 64
- 3 Draw out the lamp unit 65
- 4 Install a new lamp unit 65
- 5 Reset the lamp usage time 65
- 1 Remove the air filter 66
- 3 Mount the air filter 66
- Troubleshooting 67
- Cha.07 04.7.29, 11:49 AM68 68
- Warranty & Repair Service 69
- Specifications 70
- Cover3.pmd 04.7.29, 11:43 AM1 71
Related products and manuals for Car speakers MAC Audio MP 16.2
Car speakers MAC Audio MP 2.13 User Manual
(20 pages)
(20 pages)
Car speakers MAC Audio MP 2.16 User Manual
(36 pages)
(36 pages)
Car speakers MAC Audio SX 12 User Manual
(7 pages)
(7 pages)
Car speakers MAC Audio MP 69.4 User Manual
(11 pages)
(11 pages)
Car speakers MAC Audio SX 12 User Manual
(21 pages)
(21 pages)
Car speakers MAC Audio MP 16.2 User Manual
(43 pages)
(43 pages)
© 2020, manymanuals.com. All rights reserved. | 2.936 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals